Customization of non-standard lighting fixtures

Ⅰ.Do you know? Customized lighting design for non-standard lighting fixtures should have uniform brightness

Ⅱ.How to find suitable crystal lights from various hotels

Ⅲ.Understand the relevant operating procedures of international air freight

Do you know? Customized lighting design for non-standard lighting fixtures should have uniform brightness

Living room: You need to create an intimate atmosphere, but please choose the traditional ceiling lamp or Chandelier. The lamp should be high and bright enough to scatter light in the living room. The general lighting style should be maintained as coordinated as possible. If the living area is large, lighting can be effectively arranged according to the area and functional area. Entrance: Here you can enter the room to give an impression. Therefore, it should be lightweight. Downlights, spotlights, or wall lights can be installed near the intersection of the entrance and living room to improve the lack of light.

Customization of non-standard lighting fixtures

The customized lighting design of non-standard lamps should have uniform brightness to create a bright and pleasant atmosphere. It can increase the layering of light and create a contrast between light and dark. Each lamp or different combination of wires is cleverly arranged and combined. At the same time, a switch or dimmer that can adjust brightness can be set. Both primary and secondary collaborations can be used. You can use large chandeliers as the main light source. Small floor lamps, desk lamps, and other additional local lighting provide it with different primary and auxiliary lighting atmospheres. You can also use the built-in light as the main light source in the living room, supplemented by desk lamps or floor lamps to supplement the brightness of the corners. It doesn't need to be too bright, but it is enough to meet people's visual requirements for various activities while still feeling elegant and creating a calm atmosphere.

For the customization of non-standard lighting fixtures, it is important to consider the weight balance issue that household lamp manufacturers do not have to consider. Most technical lights are non-standard products. Different shapes, materials, and weights require experienced non-standard customer specific manufacturers. Each load-bearing structure and hole structure of the lamp must be considered. Usually, customers who choose non-standard technology lights for customization are designers or buyers. They are aware of their project conditions, such as decoration style, required quantity, construction time, etc., and are very clear about their needs. Therefore, after communicating with such customers, you can quickly understand their needs so that you can communicate them to the designers and create a custom plan.

How to find suitable crystal lights from various hotels

The main process required for modern crystal lamps is the chassis. The stainless steel chassis needs to be cut and processed to achieve the desired shape and effect, while the process for European crystal lamps is much more complex. Taking iron as an example, starting from the purchased raw material iron pipe, a series of processes such as bending, welding, polishing, pickling, phosphating, baking/electroplating, assembly, etc. are required to make a high-quality European crystal lamp, From the steps taken alone, there are significant differences from modern crystal lamps.

Modern crystal lamps belong to low-voltage lamps, with most styles being ceiling lamps or ceiling chandeliers. The light source is usually equipped with LED and transformer, which gives the overall feeling of freshness, simplicity, and a strong sense of modernity; European style crystal lamps are mainly Chandelier with more complex and varied shapes. The whole lamp structure is more elegant, the lines are more beautiful, and it has a strong European romanticism. When equipped with bright crystal pendants, the whole room is full of light, bright and beautiful, and the lamp head is usually E14. The light source can use ordinary candle bubbles or LED candle bubbles to create a warm and warm room.

Hotel Crystal Light

Modern crystal lamps are relatively simple and fashionable, while European crystal lamps are more retro and luxurious. The former is suitable for the simple and modern style of decoration, while the latter is more suitable for the European style decoration atmosphere. In terms of material, the two types of lamps also use different materials. Modern crystal lamps are low-pressure crystal lamps, and the chassis is mostly made of stainless steel, while the main body is made of crystal. European crystal lamps, due to their complex and varied styles, often use materials such as iron, glass tubes, zinc alloy, copper, etc., which are manually bent and processed to form the lamp body. Then, they are paired with high-quality crystal pendants, and an elegant European crystal lamp is done. 

Understand the relevant operating procedures of international air freight

1. Accept inquiries from shippers:

Some information should be asked to the inquiry shipper, such as:

a. Destination (good to know the English spelling and country of the port, three character code);

b. Port of departure: such as Tianjin, Shanghai, Guangzhou, etc;

c. Gross weight and volume: Volume weight is divided by volume by 0.006 or volume by 167;

d. Ask about the shipping time or approximate delivery time, in order to consider the assigned flight and whether there are any special requirements for the voyage, such as whether a direct flight is necessary;

e. Freight prepaid or collect, whether it is door-to-door (if door-to-door, a detailed address of the consignee is required to provide a quotation);

f. Product name: Is it a hazardous material, does it require commercial inspection, magnetic steel needs to undergo magnetic inspection, and some chemical products require non hazardous letter of guarantee and chemical identification certificate (original).

2. Accept consignment from the shipper:

After receiving the shipper's consignment, carefully review the consignment, mainly checking whether the basic information is complete; Confirm the pickup time, delivery method, and insurance amount.

3. Booking:

Writing a power of attorney; When creating a document, it is important to ensure the accuracy and consistency of the original tracking data to reduce frequent changes in the subsequent process. Generally, the shipper, consignee (detailed name, address, phone number, etc.), and product name should be filled in correctly; Fax the power of attorney to the agent and confirm if it has been received. If there are special requirements, please advise again and obtain the warehouse number and warehouse drawing.

4. Entry:

If the customer delivers the goods to the airport themselves, they usually need to forward the warehouse receipt to the customer in advance, informing them of the warehouse number and address. The carrier should be informed of the documents along with the goods.

5. Customs declaration:

Understand the information required for customs declaration of frequently exported goods; Fill in the corresponding packing list and invoice, the gross weight and net weight, number of pieces, packing type, amount and volume shown, and review the correctness of the Customs declaration (the documents are consistent). It is specially pointed out that the export unit in Zhuji, if the "port of destination" column on the Customs declaration cannot be displayed as a port but can only jump out of the country, must mark "port of destination: 'e.g. Port of Tianjin'" in the "mark code and remarks" column on the Customs declaration, otherwise the tax refund will be affected; Display the "Chinese name" of the goods where the Customs declaration is located, check the commodity code against the customs code, check whether they are consistent, determine the Unit of measurement according to the code, and click the missing customs declaration requirements according to the supervision conditions listed by the customs; Sending documents or accompanying documents must be carefully checked for any missing documents or data errors before sealing; Track customs clearance and ensure loading and boarding.

6. Confirmation and modification of bill of lading:

Confirm with the customer the display of the bill of lading content, and the product name must be consistent with the information.

7. Signature:

After customs clearance, the carrier immediately faxes the main and sub orders, prepares a bill of lading based on the information of the main and sub orders, and faxes it to the customer.

8. Cost settlement:

After entering the incurred expenses in the A/R and A/P details, print the fax Bill of costs in the Freight Confirmation Doc interface, confirm the return, invoice and settle (cash, delegated collection, monthly settlement, transfer).